Call, email, fax or visit...

Directions to Ewing Controls

From the south and west

1. Take I-91 North to Exit 26 (Route 2 rotary).
2. Ramp ends in a rotary. Take first right out of rotary onto Route 2A east toward Greenfield.
3. Go approximately 1 mile. You will be nearing the center of Greenfield.
4. Look for a black and white “Furniture” sign on the left. Turn left at the sign onto Wells Street.
5. Go about 1 mile or so on Wells Street. Look for a Yamaha dealer on the left.
6. Our shop is in the Venture Center behind the Yamaha dealer. As you come into the parking lot look for a concrete ramp. Our office is through the door at the top of the ramp.

From the east

1. Take Route 2 West to Greenfield.
2. Get off Route 2 at the exit for US 5/ Route 10.
3. Go left at the bottom of the ramp.
4. At the first light, turn right onto Silver Street.
5. Go about a mile or so on Silver Street. Look for a car wash on the right. Just past the car wash turn left onto Wells Street. After a short distance you will see a Yamaha dealer on the right.
6. Our shop is in the Venture Center behind the Yamaha dealer. As you come into the parking lot look for a concrete ramp. Our office is through the door at the top of the ramp.

From the north

1. Take I-91 South to Exit 26 (Route 2 rotary).
2. Ramp ends in a rotary. Go 3/4 of the way around the rotary and take a right out of rotary onto Route 2A east toward Greenfield.
3. Go approximately 1 mile. You will be nearing the center of Greenfield.
4. Look for a black and white “Furniture” sign. Turn left at the sign onto Wells Street.
5. Go about 1 mile or so on Wells Street. Look for a Yamaha dealer on the left.
6. Our shop is in the Venture Center behind the Yamaha dealer. As you come into the parking lot look for a concrete ramp. Our office is through the door at the top of the ramp.